People searching for "Talegaon MIDC plot rate" usually want three answers: what a plot costs, whether any plot is free, and how to get one. This guide answers them only from MIDC's own published data and circulars. It does not describe the area's roads, industries or market, because MIDC's Land Bank does not publish that information.

"MIDC's data shows" means the MIDC Land Bank or Land Rates page as captured. "The circular says" means an MIDC circular. "Practical tip" means our own suggestion.

01What MIDC's Land Bank lists for Talegaon

MIDC publishes a Land Bank, linked from the MIDC website's Investors menu. It lists seven Talegaon rows, each against a Regional Office, which is MIDC's local office for the area:

  • RO PUNE-I: Talegaon, Talegaon Ph-2, Talegaon Ph-4, Talegaon Ph-5 and Talegaon Floriculture Park.
  • RO PUNE-II: IIA Talegaon.
  • RO PUNE-II (IT): IIA Talegaon, a second time.

The capture had no row labelled Talegaon Ph-3. The Land Bank does not give each area's extent, villages or boundaries, and it does not explain what "IIA" stands for.

02Rates and availability: the Land Bank on 15 November 2026

The table below is as published on MIDC Land Bank at capture on 15 November 2026 (17:33 IST). Re-check it on the Land Bank before relying on it. The Land Bank prints no effective date.

Industrial areaRegional OfficeTotal plots availableCurrent rate (Rs/sq m, as printed)
TalegaonRO PUNE-I04730
Talegaon Ph-2RO PUNE-I05730
Talegaon Ph-4RO PUNE-I27930
Talegaon Ph-5RO PUNE-I46380
Talegaon Floriculture ParkRO PUNE-I0484
IIA TalegaonRO PUNE-II0NA
IIA TalegaonRO PUNE-II (IT)0NA

Plots shown with an "Apply" action

Six plots carried the "Apply" action at capture. They are reproduced as printed. Upset rates are shown without a unit against the plot row.

AreaPlotPlot areaUpset rateMSME Reservation (as printed)Remarks (as printed)
Ph-4A-9120000 sq.m8723GeneralInfrastructure not available
Ph-4A-13100000 sq.m8723GeneralInfrastructure not available
Ph-5A-182056 sq.m7369General · Gen-Specially abledINFRASTRUCTURE IS NOT AVAILABLE
Ph-5A-652078 sq.m7369Scheduled Castes/Tribes (SC/ST) · SC/ST-GeneralN.A.
Ph-5A-38517 sq.m7018Scheduled Castes/Tribes (SC/ST) · SC/ST-GeneralINFRASTRUCTURE IS NOT AVAILABLE
Ph-5A-162000 sq.m7369Scheduled Castes/Tribes (SC/ST) · SC/ST-GeneralINFRASTRUCTURE IS NOT AVAILABLE

A listing is not an allotment. Whether a given applicant can apply for a plot in a reserved category depends on MIDC's rules for that category. Four of the six plots carry a remark that infrastructure is not available.

Plots already under allotment

A second group of lists on the same page showed plots marked "Allotment in progress" and "Allotment Under Process". These plots are not open to apply for:

  • Talegaon Ph-2: 10 plots. Seven of them are in the category "Government Approved MSME Cluster".
  • Talegaon Ph-4: 3 plots.
  • Talegaon Ph-5: 46 plots.

For Talegaon, Talegaon Floriculture Park and both IIA Talegaon rows, the available-plot list read "No Records!!!".

How these figures relate to the Land Rates page

MIDC's separate Land Rates page, captured on 14 November 2026, showed the same industrial rates: 4730, 5730, 7930, 6380 and 484. It also printed a "Commercial Rate" of 11790 for Talegaon. It did not list IIA Talegaon. That page shows no effective date and no unit, so we rely on the Land Bank, which states Rs/sq meter.

Current rate versus upset rate

MIDC's Pricing Policy circular of 16 October 2025 defines the upset rate as the prevailing rate plus 10%. It is the minimum anyone may bid.

Our arithmetic, not printed by MIDC:

  • 8723 is 110% of 7930 (Ph-4).
  • 7018 is 110% of 6380 (Ph-5).
  • 6303 is 110% of 5730 (Ph-2).

These fit the policy's formula. However, other plot rows show higher upset rates, such as 7369 in Ph-5, and 9596 and 9160 in Ph-4. The Land Bank does not explain the difference.

The policy also adds 9% every 1 April and allows bids up to a cap rate. See how MIDC sets plot rates.

03How to apply, and what "0 available" means

Under MILAAP 1.0, MIDC's allotment policy dated 17 October 2025, every application is made online on the MILAAP portal. The Pricing Policy says MIDC will keep showing all vacant plots there, and that applicants can view the vacant plot list and apply and bid against it at any time.

In the areas showing 0, there was no vacant plot listed to apply against at capture. The MILAAP circular says surrendered plots, and plots taken back for not being developed in time, go onto the vacant plot list immediately. Listings can therefore change.

MILAAP also has routes for existing plot holders. These cover expansion onto an adjacent plot or a plot in the same area, and land-locked land at 150% of the upset rate. Each comes with conditions.

For fees, earnest money (5% of the plot price at the upset rate on the bidding routes) and the committee timetable, read how MIDC plots are allotted under MILAAP.

04Routes to space when no suitable plot is listed

1. Buy an existing plot through an MIDC transfer

A plot already allotted to someone else changes hands through a transfer that MIDC carries out. MIDC's circular of 22 November 2023 says plots in industrial areas are transferred after MIDC levies a differential amount (फरकाची रक्कम), linked in that circular to the FSI used. See transferring an MIDC plot.

2. Take space in an existing shed (sub-letting)

Renting space in a building on an MIDC plot is sub-letting (पोटभाडे), and it needs MIDC's permission. MIDC's circular of 20 April 2026 says:

  • the plot holder applies online and receives an automatically generated permission order;
  • a sub-letting fee is charged on the area let;
  • unpermitted sub-letting attracts the fee plus a penalty.

More detail: leasing or buying a shed in an MIDC area.

Practical tip: ask the plot holder to show you that permission before you sign.

3. Incentives and location class

The Package Scheme of Incentives 2019 (Annexure I) lists Maval taluka in Group A, without a Pune Metropolitan Region marker. It classifies talukas, not MIDC areas, and does not name Talegaon.

Confirm your plot's revenue taluka from the allotment papers or 7/12 extract. Then read which incentive policy applies.

05Checklist: what to verify on the Land Bank yourself

  1. 1Open the Land Bank and note, with the date, each Talegaon row's:
    • "Total Plots Available";
    • "Current Rate (Rs/sq meter)".
  2. 2Open the plot list for your target area. Check that the plot still shows "Apply" and not "Allotment Under Process".
  3. 3Read the "MSME Reservation" entry. Confirm with MIDC whether you are eligible for that category.
  4. 4Read the remarks. If they say infrastructure is not available, ask the Regional Office in writing what is pending and when.
  5. 5Use the GIS link to see the plot's position. Confirm its boundaries with the Regional Office.
  6. 6Note the plot's upset rate, and ask the Regional Office for:
    • the unit;
    • any road-width charges;
    • the cap rate for that plot.
  7. 7Check which Regional Office handles your row. Most are RO PUNE-I; IIA Talegaon appears under RO PUNE-II and RO PUNE-II (IT).
  8. 8Apply only on the MILAAP portal. Keep the acknowledgement and fee receipts.

06In short

On 15 November 2026, MIDC's Land Bank showed:

  • 2 plots available in Talegaon Ph-4 and 4 in Talegaon Ph-5, most carrying a remark that infrastructure is not available;
  • 0 in Talegaon, Ph-2, the Floriculture Park and IIA Talegaon;
  • 59 further plots across Ph-2, Ph-4 and Ph-5 already under allotment.

Current rates ranged from 484 Rs/sq m (Floriculture Park) to 7930 Rs/sq m (Ph-4). Re-check every figure before you act.