People searching for "Chakan MIDC plot rate" usually want three answers: what a plot costs, whether any plot is free, and how to get one. This guide answers them only from MIDC's own published data and circulars. It does not describe the area's roads, industries or market, because MIDC's Land Bank does not publish that information.

"MIDC's data shows" means the MIDC Land Bank or Land Rates page as captured. "The circular says" means an MIDC circular. "Practical tip" means our own suggestion.

01What MIDC's Land Bank lists for Chakan

MIDC publishes a Land Bank, linked from the MIDC website's Investors menu. For Chakan, it lists five industrial areas:

  • Chakan Ph-1
  • Chakan Ph-2
  • Chakan Ph-3
  • Chakan Ph-4
  • Chakan Ph-5

Each one appears against the same Regional Office, printed as RO PUNE-I. The Regional Office is MIDC's local office for the area. The Land Bank does not give the extent of each phase, its villages or its boundaries.

02Rates and availability: the Land Bank on 15 November 2026

The table below is as published on MIDC Land Bank at capture on 15 November 2026 (17:33 IST). Re-check it on the Land Bank before relying on it. The Land Bank prints no effective date.

Industrial areaRegional OfficeTotal plots availableCurrent rate (Rs/sq m, as printed)
Chakan Ph-1RO PUNE-I05780
Chakan Ph-2RO PUNE-I05780
Chakan Ph-3RO PUNE-I05780
Chakan Ph-4RO PUNE-I05780
Chakan Ph-5RO PUNE-I09730

When you open a phase, the Land Bank shows its plot list. For all five phases, the list of available plots read "No Records!!!".

A second group of lists on the same page showed one plot each in Ph-1 and Ph-2. Each was marked "Allotment in progress" and "Allotment Under Process", with an upset rate of 6358 (the unit is not printed against the plot row). These plots are already in an allotment process. They are not plots you can apply for.

How these figures relate to the Land Rates page

MIDC also has a separate Land Rates page. As captured on 14 November 2026, its "Industrial Rate" for Chakan Ph-1 to Ph-4 was 5780 and for Ph-5 was 9730. These match the Land Bank. That page also printed:

  • a "Commercial Rate" of 10370 for Ph-1 to Ph-4, and "NA" for Ph-5;
  • a "Residential Rate" of 230 for Ph-2 and Ph-3, and "NA" for the rest.

The Land Rates page shows no effective date and no unit, so we rely on the Land Bank figures, which carry a unit (Rs/sq meter).

Current rate versus upset rate

MIDC's Pricing Policy circular of 16 October 2025 defines the upset rate as the prevailing rate plus 10%. It is the minimum anyone may bid.

Our arithmetic, not printed by MIDC: 6358 is exactly 110% of 5780. This fits the policy's formula. However, the Land Bank does not label its "current rate" as the prevailing rate.

The policy also adds 9% every 1 April and allows a higher bid up to a cap rate. So the price you actually pay can differ from the figure in the table. See how MIDC sets plot rates.

03What "0 plots available" means for an occupier

Under MILAAP 1.0, MIDC's allotment policy dated 17 October 2025, every application is made online on the MILAAP portal.

The Pricing Policy says MIDC will keep showing all vacant plots in its industrial areas on that portal. It says applicants can view the vacant plot list online and apply and bid against it at any time. When a phase shows 0 available plots, there was no vacant plot listed to apply against in that phase at the time of capture.

The circulars point to two ways this can change:

  • Plots come back. The MILAAP circular says a plot is added to the vacant plot list immediately when it is surrendered by the holder, or taken back for not being developed in the time allowed.
  • Existing plot holders have special routes. MILAAP's direct-allotment route covers an existing holder's expansion onto an adjacent plot or a plot in the same industrial area. It also covers land-locked land that cannot be allotted to anyone else, priced at 150% of the upset rate. Both depend on the conditions in the circular.

For the routes, fees and earnest money in full, read how MIDC plots are allotted under MILAAP.

Practical tip: a zero today is not a permanent zero. Check the Land Bank and the MILAAP vacant plot list regularly.

04Routes to space when no plot is listed

If no plot is free, the occupier routes are outside fresh allotment.

1. Buy an existing plot through an MIDC transfer

A plot already allotted to someone else changes hands through a transfer that MIDC carries out. MIDC's circular of 22 November 2023 says that, under the Corporation's policy, plots in industrial areas are transferred after MIDC levies a differential amount (फरकाची रक्कम). That circular links the amount to the floor space index (FSI) used. See transferring an MIDC plot.

2. Take space in an existing shed on someone else's plot (sub-letting)

Renting space in a building on an MIDC plot is sub-letting (पोटभाडे). It needs MIDC's permission. MIDC's circular of 20 April 2026 says:

  • the plot holder applies online, and a permission order is generated automatically;
  • MIDC charges a sub-letting fee on the area actually let;
  • sub-letting without permission attracts the fee plus a penalty.

Practical tip: before you sign a leave-and-licence for a shed, ask the plot holder for MIDC's sub-letting permission for your area and use.

More detail: leasing or buying a shed in an MIDC area.

3. Incentives and location class

The state's Package Scheme of Incentives 2019 (Annexure I) classifies talukas, not MIDC areas.

  • It lists Khed twice: in Group A for the part within the Pune Metropolitan Region, and in Group C for the part outside it.
  • It does not name Chakan or show where that boundary runs.

Confirm your plot's revenue taluka and village from the allotment papers or 7/12 extract. Then read which incentive policy applies.

05Checklist: what to verify on the Land Bank yourself

  1. 1Open the Land Bank and find the Chakan phase you want.
  2. 2Note the "Total Plots Available" and "Current Rate (Rs/sq meter)" on the day you check, with the date.
  3. 3Open the phase's plot list. For each plot, read:
    • the plot number and area;
    • the upset rate;
    • the GIS link;
    • the "MSME Reservation" category;
    • the remarks.
  4. 4Check the Action column:
    • "Apply" means the plot is open for application;
    • "Allotment Under Process" means it is not.
  5. 5Read the remarks literally. If a row says infrastructure is not available, ask the Regional Office what that means for your timeline.
  6. 6Use the GIS link to see the plot's position. Confirm its boundaries with the Regional Office before you rely on them.
  7. 7Ask RO PUNE-I in writing for:
    • the rate in force on your application date, and its unit;
    • any road-width charges;
    • the upset rate and cap rate for your plot.
  8. 8Apply only on the MILAAP portal. Keep the acknowledgement and fee receipts.

06In short

On 15 November 2026, MIDC's Land Bank showed no plots available in any of Chakan Ph-1 to Ph-5. Current rates were 5780 Rs/sq m for Ph-1 to Ph-4 and 9730 Rs/sq m for Ph-5. One plot each in Ph-1 and Ph-2 was already under allotment.

Until a plot returns to the vacant list, the practical routes are a transfer of an existing plot or permitted sub-letting of built space, each through MIDC.