People searching for "Khandala MIDC plot rate", or for MIDC land near Shirwal, usually want three answers: what a plot costs, whether any plot is free, and how to get one. This guide answers them only from MIDC's own published data and circulars. It does not describe the area's roads, industries or market, because MIDC's Land Bank does not publish that information.

"MIDC's data shows" means the MIDC Land Bank or Land Rates page as captured. "The circular says" means an MIDC circular. "Practical tip" means our own suggestion.

A note on "Shirwal"

People often search for "Shirwal MIDC". MIDC's lists that we hold have no industrial area named Shirwal. The nearest MIDC areas listed are Khandala Ph-1 and Ph-2 and Kesurdi (Khandala) SEZ, which this guide covers.

01What MIDC's Land Bank lists for Khandala and Kesurdi

MIDC publishes a Land Bank, linked from the MIDC website's Investors menu. It lists four rows here:

  • Khandala Ph-1
  • Khandala Ph-2
  • Khandala Ph-3
  • Kesurdi (Khandala) (SEZ)

Each appears against the same Regional Office, printed as RO Satara. The Regional Office is MIDC's local office for the area. The Land Bank does not give each area's extent, villages or boundaries.

02Rates and availability: the Land Bank on 16 November 2026

The tables below are as published on MIDC Land Bank at capture on 16 November 2026. Re-check them on the Land Bank before relying on them. The Land Bank prints no effective date.

Industrial areaRegional OfficeTotal plots availableCurrent rate (Rs/sq m, as printed)
Khandala Ph-1RO Satara02300
Khandala Ph-2RO Satara03030
Khandala Ph-3RO Satara0NA
Kesurdi (Khandala) (SEZ)RO Satara73940

A second table on the same page lists plots under allotment. It showed 1 plot in Kesurdi (Khandala) (SEZ): 10,556 sq m, upset rate 4768, marked "N.A. Allotment in progress". That plot is already in an allotment process and is not open to apply for. The table listed no Khandala phase.

Kesurdi (Khandala) SEZ: the seven plots in the vacant list

The vacant-plot list for Kesurdi had 7 rows, which matches the summary count. They are reproduced as printed. Upset rates are shown without a unit against the plot row.

PlotPlot areaUpset rateGISMSME Reservation (as printed)Remarks (as printed)
149870 sq.m4768MappedGeneralN.A.
158000 sq.m4768MappedGeneralN.A.
166332 sq.m4768MappedGeneralN.A.
1713371 sq.m4768MappedGeneralN.A.
185122 sq.m4768MappedGeneralN.A.
2015204 sq.m4768MappedGeneralN.A.
2140087 sq.m4551MappedGeneralN.A.

We have put the rows in plot-number order; the Land Bank prints them in a different order. A listing is not an allotment, and the list can change at any time.

Kesurdi is listed as an SEZ. Rules specific to special economic zones (who may set up there, and on what terms) are not covered by our sources. Ask RO Satara which rules apply before you plan around a plot there.

For the three Khandala phases, the Land Bank showed 0 plots available, and the extract reproduces no vacant plot rows for them.

How these figures relate to the Land Rates page

MIDC also has a separate Land Rates page. As captured on 14 November 2026, it listed these areas under district Satara and RO Satara:

Industrial areaIndustrial RateCommercial RateResidential Rate
Khandala Ph-12300NANA
Khandala Ph-23030NANA
Kesurdi (Khandala) (SEZ)3940NANA

The industrial rates match the Land Bank. The Land Rates page had no row for Khandala Ph-3, for which the Land Bank prints "NA" as the rate. It shows no effective date and no unit, so we rely on the Land Bank figures, which carry a unit (Rs/sq meter).

Current rate versus upset rate

MIDC's Pricing Policy circular of 16 October 2025 defines the upset rate as the prevailing rate plus 10%. It is the minimum anyone may bid.

Our arithmetic, not printed by MIDC: 110% of 3940 is 4334. The Kesurdi upset rates printed, 4768 and 4551, do not equal that figure. The Land Bank does not explain the difference, and it does not label its "current rate" as the prevailing rate. Ask the Regional Office which figure applies to your plot.

The policy also adds 9% every 1 April and allows bids up to a cap rate. See how MIDC sets plot rates.

03How to apply, and what "0 available" means

Under MILAAP 1.0, MIDC's allotment policy dated 17 October 2025, every application is made online on the MILAAP portal. The Pricing Policy says MIDC will keep showing all vacant plots there, and that applicants can view the vacant plot list and apply and bid against it at any time.

In the three Khandala phases, the count of 0 means there was no vacant plot listed to apply against at capture. The MILAAP circular says surrendered plots, and plots taken back for not being developed in time, go onto the vacant plot list immediately. Listings can therefore change.

MILAAP also has routes for existing plot holders. These cover expansion onto an adjacent plot or a plot in the same area, and land-locked land at 150% of the upset rate. Each comes with conditions.

For fees, earnest money and the committee timetable, read how MIDC plots are allotted under MILAAP.

04Routes to space when no suitable plot is listed

These guides deal with MIDC industrial areas generally. They do not cover SEZ-specific rules.

Incentives and location class

The state's Package Scheme of Incentives 2019 classifies talukas, not MIDC areas. Our sources do not print the taluka for these MIDC areas; the "Khandala" in their names is part of MIDC's area name. So this guide does not state a class. Confirm your plot's revenue taluka and village from the allotment papers or 7/12 extract. Then read which incentive policy applies.

05Checklist: what to verify on the Land Bank yourself

  1. 1Open the Land Bank and note, with the date, each row's:
    • "Total Plots Available";
    • "Current Rate (Rs/sq meter)".
  2. 2Open the plot list for your target area. Check that the plot is still in the vacant list and shows "Apply", not "Allotment in progress".
  3. 3Read the "MSME Reservation" entry and the remarks, and ask about anything that is unclear.
  4. 4Use the GIS link to see the plot's position. Confirm its boundaries with the Regional Office.
  5. 5Ask RO Satara in writing for:
    • the rate in force on your application date, and its unit;
    • the upset rate and cap rate for your plot, and why it differs from 110% of the current rate;
    • any road-width charges;
    • for Kesurdi, which SEZ rules apply to your proposed unit.
  6. 6Apply only on the MILAAP portal. Keep the acknowledgement and fee receipts.

06In short

On 16 November 2026, MIDC's Land Bank showed:

  • 7 plots in the vacant list for Kesurdi (Khandala) (SEZ), from 5,122 sq m to 40,087 sq m, at a current rate of 3940 Rs/sq m, with one more plot under allotment;
  • 0 in Khandala Ph-1 (2300 Rs/sq m), Ph-2 (3030 Rs/sq m) and Ph-3 (rate "NA").

There is no MIDC area named Shirwal in the lists we hold. Re-check every figure before you act.