People searching for "Ranjangaon MIDC plot rate" usually want three answers: what a plot costs, whether any plot is free, and how to get one. This guide answers them only from MIDC's own published data and circulars. It does not describe the area's roads, industries or market, because MIDC's Land Bank does not publish that information.
"MIDC's data shows" means the MIDC Land Bank or Land Rates page as captured. "The circular says" means an MIDC circular. "Practical tip" means our own suggestion.
01What MIDC's Land Bank lists for Ranjangaon
MIDC publishes a Land Bank, linked from the MIDC website's Investors menu. For Ranjangaon it lists two industrial areas:
- Ranjangaon
- Ranjangaon Ph-3
Both appear against the same Regional Office, printed as RO PUNE-II. The Regional Office is MIDC's local office for the area. MIDC's full Pune district list on its Land Rates page (below) had no row labelled Ranjangaon Ph-2. The Land Bank does not give either area's extent, villages or boundaries.
02Rates and availability: the Land Bank on 16 November 2026
The tables below are as published on MIDC Land Bank at capture on 16 November 2026. Re-check them on the Land Bank before relying on them. The Land Bank prints no effective date.
| Industrial area | Regional Office | Total plots available | Current rate (Rs/sq m, as printed) |
|---|---|---|---|
| Ranjangaon | RO PUNE-II | 0 | 3110 |
| Ranjangaon Ph-3 | RO PUNE-II | 203 | 5370 |
A second table on the same page lists plots under allotment. These plots are already in an allotment process and are not open to apply for.
| Industrial area | Plots listed under allotment | Current rate (Rs/sq m, as printed) |
|---|---|---|
| Ranjangaon | 8 | 3110 |
| Ranjangaon Ph-3 | 10 | 5370 |
The plot-level list under these counts is shorter: 4 rows carry a plot area for Ranjangaon and 5 for Ranjangaon Ph-3. We use the summary counts as published, because the plot lists may be partial. Each of those rows is marked "Allotment in progress". For Ranjangaon, the remarks printed on them include an electric line and, on one row, a farmer dispute and school encroachment.
What the Ranjangaon Ph-3 vacant list shows
The vacant-plot list for Ranjangaon Ph-3 has 203 rows, which matches the summary count. We counted the rows as printed. Here is what they show.
- Plot areas range from 318 sq m to 127,733 sq m:
- 72 plots under 1,000 sq m;
- 84 plots from 1,000 to under 5,000 sq m;
- 21 plots from 5,000 to under 10,000 sq m;
- 23 plots from 10,000 to under 50,000 sq m;
- 3 plots of 50,000 sq m or more.
- Remarks:
- 155 rows say "Infrastructure in Process" (one of them adds "and Reserved for IFB", which the Land Bank does not explain);
- 48 rows say "Land not in Possession".
- MSME Reservation column:
- 173 rows carry a "General" category. Of these, 72 read "General" alone, 85 "Gen-General", 8 "Gen-Women or SelfHelp Group of Women", 5 "Gen-Ex-Serviceman" and 3 "Gen-Specially abled".
- 30 rows carry a "Scheduled Castes/Tribes (SC/ST)" category. Of these, 27 read "SC/ST-General", and one each reads Ex-Serviceman, Women or SelfHelp Group of Women, and Specially abled.
- Upset rates (no unit printed against the plot rows): 5907 on 102 plots, 6203 on 95, 6794 on 4 and 6055 on 2.
- GIS: 202 rows are marked "Mapped" and 1 "Not mapped".
- Plot numbers begin "C-" on 131 rows and "EMC-A-" on 72. The Land Bank does not explain the prefixes.
A listing is not an allotment. Whether a given applicant can apply for a plot in a reserved category depends on MIDC's rules for that category. Every row in the list carries a remark that infrastructure is in process or that land is not in possession, and the Land Bank does not say what either means for timing.
How these figures relate to the Land Rates page
MIDC also has a separate Land Rates page. As captured on 14 November 2026, it listed both areas under district Pune. Its "Industrial Rate" was 3110 for Ranjangaon and 5370 for Ranjangaon Ph-3, which matches the Land Bank. It also printed:
- for Ranjangaon, a "Residential Rate" of 900 and a "Commercial Rate" of 6890;
- for Ranjangaon Ph-3, "NA" for both.
The page's data feed returned both rows twice, under RO PUNE-II and RO PUNE-II (IT), with the same figures. The Land Rates page shows no effective date and no unit, so we rely on the Land Bank figures, which carry a unit (Rs/sq meter).
Current rate versus upset rate
MIDC's Pricing Policy circular of 16 October 2025 defines the upset rate as the prevailing rate plus 10%. It is the minimum anyone may bid.
Our arithmetic, not printed by MIDC:
- 5907 is 110% of 5370 (Ranjangaon Ph-3).
- 3421, the upset rate on the Ranjangaon under-allotment rows, is 110% of 3110.
These fit the policy's formula. However, other Ph-3 rows show 6203, 6794 and 6055, and the Land Bank does not explain the difference. It also does not label its "current rate" as the prevailing rate.
The policy also adds 9% every 1 April and allows bids up to a cap rate. See how MIDC sets plot rates.
03How to apply, and what "0 available" means
Under MILAAP 1.0, MIDC's allotment policy dated 17 October 2025, every application is made online on the MILAAP portal. The Pricing Policy says MIDC will keep showing all vacant plots there, and that applicants can view the vacant plot list and apply and bid against it at any time.
For Ranjangaon (not Ph-3), the count of 0 means there was no vacant plot listed to apply against at capture. The MILAAP circular says surrendered plots, and plots taken back for not being developed in time, go onto the vacant plot list immediately. Listings can therefore change.
MILAAP also has routes for existing plot holders. These cover expansion onto an adjacent plot or a plot in the same area, and land-locked land at 150% of the upset rate. Each comes with conditions.
For fees, earnest money and the committee timetable, read how MIDC plots are allotted under MILAAP.
04Routes to space when no suitable plot is listed
- Buy an existing plot through an MIDC transfer. A plot already allotted to someone else changes hands only through MIDC. See transferring an MIDC plot.
- Take space in an existing shed. Renting built space on an MIDC plot needs MIDC's permission. See leasing or buying a shed in an MIDC area.
- Plan the project as a whole. For approvals after allotment, see setting up a manufacturing unit.
Incentives and location class
The state's Package Scheme of Incentives 2019 classifies talukas, not MIDC areas. Our sources do not print the taluka for Ranjangaon or Ranjangaon Ph-3, so this guide does not state a class. Confirm your plot's revenue taluka and village from the allotment papers or 7/12 extract. Then read which incentive policy applies.
05Checklist: what to verify on the Land Bank yourself
- 1Open the Land Bank and note, with the date, each Ranjangaon row's:
- "Total Plots Available";
- "Current Rate (Rs/sq meter)".
- 2Open the plot list for your target area. Check that the plot is still in the vacant list and shows "Apply", not "Allotment in progress".
- 3Read the "MSME Reservation" entry. Confirm with MIDC whether you are eligible for that category.
- 4Read the remarks. If they say "Infrastructure in Process" or "Land not in Possession", ask RO PUNE-II in writing what is pending and when.
- 5Use the GIS link to see the plot's position. Confirm its boundaries with the Regional Office.
- 6Note the plot's upset rate, and ask the Regional Office for:
- the unit;
- any road-width charges;
- the cap rate for that plot.
- 7Apply only on the MILAAP portal. Keep the acknowledgement and fee receipts.
06In short
On 16 November 2026, MIDC's Land Bank showed:
- 203 plots in the vacant list for Ranjangaon Ph-3, at a current rate of 5370 Rs/sq m, every one with a remark that infrastructure is in process or land is not in possession;
- 0 for Ranjangaon, at a current rate of 3110 Rs/sq m;
- 18 further plots across the two areas already under allotment.
Re-check every figure before you act.


