People searching for "Satara MIDC plot rate" usually want three answers: what a plot costs, whether any plot is free, and how to get one. This guide answers them only from MIDC's own published data and circulars. It does not describe the area's roads, industries or market, because MIDC's Land Bank does not publish that information.

"MIDC's data shows" means the MIDC Land Bank or Land Rates page as captured. "The circular says" means an MIDC circular. "Practical tip" means our own suggestion.

01What MIDC's Land Bank lists for Satara

MIDC publishes a Land Bank, linked from the MIDC website's Investors menu. This guide covers two of its rows:

  • Satara
  • Addl. Satara

Both appear against the same Regional Office, printed as RO Satara. The Regional Office is MIDC's local office for the area. The Land Bank does not give either area's extent, villages or boundaries, and it does not explain how "Addl. Satara" differs from "Satara".

RO Satara also handles other areas, including Khandala Ph-1 to Ph-3 and Kesurdi (Khandala) SEZ. Those are covered in our Khandala and Kesurdi guide.

02Rates and availability: the Land Bank on 16 November 2026

The table below is as published on MIDC Land Bank at capture on 16 November 2026. Re-check it on the Land Bank before relying on it. The Land Bank prints no effective date.

Industrial areaRegional OfficeTotal plots availableCurrent rate (Rs/sq m, as printed)
SataraRO Satara01100
Addl. SataraRO Satara01100

The extract reproduces no vacant plot rows for either area.

The one plot under allotment

A second table on the same page lists plots under allotment. It showed 1 plot in Satara and none in Addl. Satara. As printed:

  • plot area 720 sq m;
  • upset rate 4166 (no unit printed against the plot row);
  • MSME Reservation "General";
  • a remark that the plot "will be alloted along with builtup shed admeasuring 112.50. Sq mtr", followed by "Allotment in progress".

This plot is already in an allotment process. It is not open to apply for. The Land Bank does not explain how the upset rate of 4166 was arrived at.

03A rate difference to check: 1100 or 902?

MIDC also has a separate Land Rates page. As captured on 14 November 2026, it listed both areas under district Satara and RO Satara:

Industrial areaIndustrial RateResidential RateCommercial Rate
Satara90215402290
Addl. Satara90215402290

The industrial figure does not match the Land Bank. The Land Bank, captured two days later, prints a current rate of 1100 Rs/sq m for both areas. The Land Rates page prints 902.

What we can and cannot say:

  • Neither page shows an effective date, so we cannot tell which figure is in force, or whether either one changed between the two captures.
  • The Land Rates page shows no unit. The Land Bank states Rs/sq meter, so this guide leads with the Land Bank figure.
  • We do not guess at the reason for the difference.

Practical tip: before you budget for a Satara plot, ask RO Satara in writing which rate is in force on your application date, and its unit. Keep the reply with your file.

Current rate versus upset rate

MIDC's Pricing Policy circular of 16 October 2025 defines the upset rate as the prevailing rate plus 10%. It is the minimum anyone may bid.

Our arithmetic, not printed by MIDC: 110% of 1100 is 1210, and 110% of 902 is about 992. The one upset rate printed for Satara, 4166, matches neither. Its row also mentions a built-up shed, and the Land Bank does not say whether the shed affects the figure. The Land Bank also does not label its "current rate" as the prevailing rate.

The policy also adds 9% every 1 April and allows bids up to a cap rate. See how MIDC sets plot rates.

04How to apply, and what "0 available" means

Under MILAAP 1.0, MIDC's allotment policy dated 17 October 2025, every application is made online on the MILAAP portal. The Pricing Policy says MIDC will keep showing all vacant plots there, and that applicants can view the vacant plot list and apply and bid against it at any time.

In both Satara areas, the count of 0 means there was no vacant plot listed to apply against at capture. The MILAAP circular says surrendered plots, and plots taken back for not being developed in time, go onto the vacant plot list immediately. Listings can therefore change.

MILAAP also has routes for existing plot holders. These cover expansion onto an adjacent plot or a plot in the same area, and land-locked land at 150% of the upset rate. Each comes with conditions.

For fees, earnest money and the committee timetable, read how MIDC plots are allotted under MILAAP.

Practical tip: a zero today is not a permanent zero. Check the Land Bank and the MILAAP vacant plot list regularly.

05Routes to space when no plot is listed

Incentives and location class

The state's Package Scheme of Incentives 2019 classifies talukas, not MIDC areas. Our sources do not print the taluka for Satara or Addl. Satara MIDC; "Satara" appears in them as the area's name and its district. So this guide does not state a class. Confirm your plot's revenue taluka and village from the allotment papers or 7/12 extract. Then read which incentive policy applies.

06Checklist: what to verify on the Land Bank yourself

  1. 1Open the Land Bank and note, with the date, the Satara and Addl. Satara rows':
    • "Total Plots Available";
    • "Current Rate (Rs/sq meter)".
  2. 2Open the Land Rates page on the same day and compare its industrial rate. Note any difference.
  3. 3If a plot appears, open the plot list and check that it shows "Apply", not "Allotment in progress".
  4. 4Read the "MSME Reservation" entry and the remarks. If a remark mentions a shed or another condition, ask the Regional Office what it means for you.
  5. 5Use the GIS link to see the plot's position. Confirm its boundaries with the Regional Office.
  6. 6Ask RO Satara in writing for:
    • the rate in force on your application date, and its unit;
    • the upset rate and cap rate for your plot;
    • any road-width charges.
  7. 7Apply only on the MILAAP portal. Keep the acknowledgement and fee receipts.

07In short

On 16 November 2026, MIDC's Land Bank showed no plots available in Satara or Addl. Satara, at a current rate of 1100 Rs/sq m for both. One plot in Satara, to be allotted with a built-up shed, was already under allotment.

MIDC's Land Rates page, captured two days earlier, printed 902 for both areas. Until MIDC confirms which rate applies, treat both figures as unconfirmed, and re-check every figure before you act.